| |
|
|
| - Board converting processes,
including diecutting and printer slotters, generate dust
which needs to be removed before high quality printing and
coating. |
|
-
Dust on paper machines, slitters, winders and tissue lines
reduces productivity and quality. |
| - If the product to be coated is not clean the
final quality will be poor. The Meech Series 1000 removes
this contamination thoroughly and cost-effectively. |
|
- Vacuum forming materials for use in sensitive
medical packaging can be cleaned to ensure the highest standards. |
| - The high static charges generated
during the manufacture of vinyl flooring attract large particles.
If they are not removed they can become embedded into the
product. |
|
- Plastic substrates from acrylic sheets
to membrane switches attract dust which must be removed before
printing. |
| - Thermoforming
substrates must be clean before being formed. The Meech series
1000
also neutralises the static charge which improves further
handling. |
|
- Contaminated stock causes
downtime for cleaning of image areas on web fed presses in
offset, flexo, letterpress and gravure printing. |
| - Wherever materials are joined
together they should be clean to prevent inclusions impairing
the quality. This is a wide area including plastic films,
pcb substrates, metal sheets and foils. |
|
- Machining dust and contaminants
must be removed from flat sheets of wood, MDF and laminated
boards before finishing, decorating or coating. |
